Improved Node Labelling; Improved Dme Manager Uninstall; Support For Legacy Configurations - Yamaha DME 32 Owner's Manual

Improved Node Labelling

For components with many inputs and outputs, certain nodes are now
labeled in order to help distinguish them more easily. This applies to
components with five or more input or output nodes, with every fourth
node being labelled (e.g., 4, 8, 12, and so on). The new node numbers
can be seen here on the new 32x32 Matrix Mixer component.

Improved DME Manager Uninstall

Previously, files left in the DME folder after DME Manager was uninstalled used to
cause problems when a newer version of DME Manager was installed. This issue has
now been resolved.
Support for Legacy Configurations
To support the new features of Version 1.5, the DME file format has been updated. The
first time a configuration created using an earlier version of DME Manager is opened
or transferred from the DME32, it's automatically converted to a Version 1.5 compati-
ble configuration.
Note: When a Version 1.5 configuration is used with an earlier version of DME Manager,
normal performance cannot be guaranteed and operation may be unreliable.
In addition, "L" and "R" labels have been added to
effects and dynamics components with two inputs or two outputs,
as shown here.
DME32—V1.5 Owner's Manual Supplement
15