Midi Connection - Yamaha DME64N Owner's Manual

Connection

MIDI Connection

In this case connection is made to the rear-panel [MIDI] connectors. MIDI commands are sent to the
DME64N/24N from a MIDI device.
N OT E
Refer to "MIDI Page" on page 52 for MIDI setup details.
N OT E
The DME Designer can be used to set up the system so that scene recall operations and user parameter control can be carried
out from connected MIDI devices. Refer to the DME Designer manual for details.
By connecting the [MIDI OUT] terminal of a digital mixer (such as the DM2000) to the [MIDI OUT] of the
DME64N/24N and making the proper settings on the mixer and the DME64N/24N, you can change scenes
by sending program change messages from the mixer.
If the [MIDI OUT] connector of the DME64N/24N is connected to the [MIDI IN] connector of an
SPX2000 or similar digital effect unit, and if the DME64N/24N and SPX2000 are set up appropriately,
DME64N/24N program change operations will case the corresponding effect to be recalled on the effect unit.
30
DME64N/24N Owner's Manual
MIDI OUT
DM2000 Digital Mixer or Other Controller
MIDI Cable
MIDI OUT
DME64N/24N
MIDI Cable
MIDI IN
DME64N/24N
MIDI IN
SPX2000 or Other Digital Effect Unit