Main Display; Page Scroll Bar; Mute Indicator; Output Level Indicator - Yamaha DME64N Owner's Manual

Main Display

The Main display will appear in a few seconds after the
power is turned on. The Main display shows information
about the current scene.
NOT E
Nothing will appear on the display if no scene data is stored in
the DME64N/24N scene memory (this is the case when the unit
is initially shipped, for example).
Up to 24 parameters can be accessed from the DME64N/
24N or ICP1 control panel for each scene. Six parameters
are shown on the Main display at a time.
2
1
3
2

1 Scene Information

The current scene number and name. Scene names can be
entered by using the DME Designer application.
A maximum of 12 one-byte (Roman) characters can be
displayed in a scene name. When "two-byte" characters are
to be used for languages such as Japanese, the total number
of displayable characters is reduced accordingly.
When the power is turned on the last scene selected before
the power was turned off is automatically recalled.
2 User-defined Parameter Names
Displays the user-defined parameters. The parameters are
specified by using the DME Designer application.
A maximum of 24 parameters can be made available for
user control, but only six parameters can be shown in any
one display page. Press the [HOME] button to switch to
other available parameter pages. A maximum of 8 one-byte
(Roman) characters can be displayed in a parameter name.
When "two-byte" characters are to be used for languages
such as Japanese, the total number of displayable characters
is reduced accordingly.
Parameters are selected for editing by using the cursor
buttons – [E ] [ ] [ ] [F ] – to select the parameter,
and then pressing [ENTER].

3 Page Scroll Bar

The scroll bar provides an indication of which parameter
page is currently being displayed. 4 pages are available, and
the scroll bar moves one position to the right each time the
[HOME] button is pressed and a new page of parameters
is selected, and then back to the leftmost position after the
rightmost position has been reached.

4 Mute Indicator

Shows the current mute ON/OFF status.
: Mute ON
: Mute OFF
4

5 Output Level Indicator

5
Displays the current output level in 10 increments.
6
The longer the "bar," the higher the output level.

6 Panel Lock Icon

This icon appears when the panel lock function is turned
ON.
: Panel Lock ON (Panel controls locked)
The panel controls can be "locked" to prevent
accidental mis-operation.
To activate the panel lock function simultaneously press
and hold the [HOME] and [ENTER] buttons for
longer than 2 seconds.
The panel lock icon will appear on the Main display
when the panel is locked.
Panel Lock can be disengaged by pressing the
[CANCEL] button for longer than 2 seconds.
N OTE
The panel lock function can be set up to lock just the panel
buttons ("Key Only"), or the panel buttons and GPI control
("Key+GPI"). You can also select whether or not the panel lock
function is automatically engaged when the unit is initially
turned on. This selection can be made via the Utility display
"Lock" page (refer to the page 50).
Panel Lock
Panel lock icon
DME64N/24N Owner's Manual
Main Display
39