Fig. 3-10 Changing Parameters Using The Bop; Changing Parameters Using The Operator Panel - Siemens MICROMASTER 420 Operating Instructions Manual

Issue 07/04
3.2.4

Changing parameters using the operator panel

The way that parameter P0719 can be changed will now be described; please use
this description as a basis when setting all of the other parameters using the BOP.
Changing P0004 – parameter filter function
1
Press
2
Press
3
Press
4
Press
5
Press
6
The user can only see the command parameters.
Changing an indexed parameter P0719 – selecting the command/frequency
setpoint
1
Press
2
Press
3
Press
4
Press
5
Press
6
Press
7
Press
Press
8
(the display which the customer has defined)
Fig. 3-10
NOTE
The BOP sometimes display
means that the drive inverter is presently handling another higher-priority task.
MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
Step
in order to access the parameter
until P0004 is displayed
in order to reach the parameter value level
or in order to obtain the required value
to acknowledge the value and to save the value
Step
in order to access the parameter
until P0719 is displayed
in order to reach the parameter value
in order to display the currently set value
or in order to obtain the required value
to acknowledge the value and to save the value
until r0000 is displayed
in order to return to the operating display
Changing parameters using the BOP
Result on the display
when changing parameter values. This
3 Functions
Result on the display
55