Fig. 3-2 Header Line For Parameter P0305 - Siemens MICROMASTER 420 Operating Instructions Manual

3 Functions
Attribute Attribute
group
Active
Immediately
After
actuation
The attributes and groups are shown, in the parameter list, in the header line of the
parameter. This is shown as an example in Fig. 3-2 using parameter P0305.
Parameter number
Index
BICO (if exist)
Parameter text
P0305[3]
Rated motor current
CStat:
P-Group:
Group
CStat
Fig. 3-2 Header line for parameter P0305
42
This attribute is only of importance in conjunction with a BOP. The "Immediate"
attribute indicates that this value is already accepted when scrolling (when changing
the value with or
functions have this property (e.g. constant voltage boost P1310 or filter time
constants). On the other hand, for parameters with the attribute "After actuation", the
value is only accepted after first actuating the key
parameters where the parameter value can have different settings/meanings (e.g.
selecting the frequency setpoint source P1000).
The value becomes valid by either scrolling with
The value is only accepted by pressing
C Datatype:
MOTOR Active: first confirm
Active
Datatype
Description
). Especially parameters which are used for optimization
Float Unit A
QuickComm. Yes
QuickComm.
Unit
MICROMASTER 420
Issue 07/04
. These include, for example,
or
Access level
Min: 0.01 Level:
1
Def: 3.25
Max:
10000.00
Wertebereich
Operating Instructions
6SE6400-5AA00-0BP0