Table 5-4 Micromaster 420 Specifications - Siemens MICROMASTER 420 Operating Instructions Manual

5 MICROMASTER 420 specifications
Table 5-4 MICROMASTER 420 Specifications
In order to have a UL compliant installation fuses from the SITOR range with the
appropriate current rating must be used.
Input voltage range
(with built in Class A Filter)
6SE6420- 2AB11
Order No.
[kW]
Output Rating
[hp]
Output Power [kVA]
Input Current 1) [A]
Output Current [A]
Fuse [A]
Recommended 3NA
For UL specified
[mm
Input Cable, min.
[awg]
[mm
Input Cable, max.
[awg]
[mm
Output Cable, min.
[awg]
[mm
Output Cable, max.
[awg]
[kg]
Weight
[lbs]
1) Secondary conditions:
* UL listed fuses such as Class NON from Bussmann are required for use in America
160
1 AC 200 V – 240 V, ± 10 %
2AB12 2AB13
-2AA1 -5AA1 -7AA1
0.12 0.25
0.16 0.33
0.4 0.7
1.8 3.2
0.9 1.7
10 10
3803 3803
* *
2
] 1.0 1.0
17 17
2
] 2.5 2.5
13 13
2
] 1.0 1.0
17 17
2
] 2.5 2.5
13 13
1.2 1.2
2.6 2.6
Input current at the rated operating point - applies for the short-circuit voltage of the line
supply V = 1 % referred to the rated drive converter power and a rated line supply voltage
k
of 240 V without line commutating reactor. If a line commutating reactor is used, the
specified values are reduced by between 55 % and 70 %.
2AB15 2AB17 2AB21
-5AA1 -5AA1 -1BA1
0.37 0.55 0.75
0.5 0.75 1.0
1.0 1.3 1.7
4.6 6.2 8.2
2.3 3.0 3.9
10 10 16
3803 3803 3805
* * *
1.0 1.0 1.0
17 17 17
2.5 2.5 2.5
13 13 13
1.0 1.0 1.0
17 17 17
2.5 2.5 2.5
13 13 13
1.2 1.3 1.3
2.6 2.9 2.9
MICROMASTER 420
Issue 07/04
2AB21 2AB22 2AB23
-5BA1 -2BA1 -0CA1
1.1 1.5 2.2
1.5 2.0 3.0
2.4 3.2 4.6
11.0 14.4 20.2
5.5 7.4 10.4
20 20 32
3807 3807 3812
* * *
2.5 2.5 4.0
15 15 11
6.0 6.0 6.0
9 9 9
1.0 1.0 1.0
17 17 17
6.0 6.0 6.0
9 9 9
3.3 3.6 3.6
7.3 7.9 7.9
Operating Instructions
6SE6400-5AA00-0BP0
3.0
4.0
6.0
35.5
13.6
40
3817
*
6.0
9
10.0
7
1.5
15
10.0
7
5.2
11.4