Trial Sewing Function; Performing Trial Sewing - JUKI LK-1901A Instruction Manual

28. TRIAL SEWING FUNCTION

Data created with PM-1 (sewing data creation and edit software) can be sewn on trial by on-line
connection of the personal computer with the sewing machine.
Connect the personal computer with IP-410 and transmit data to the sewing machine after creation
of data with PM-1. WhenIP-410 becomes the data input screen, automatically the trial sewing screen
is displayed. For the operating procedure of PM-1, see HELP of PM-1 or the like.

28-1 Performing trial sewing

① Receive the trial sewing data from PM-1.
When the trial sewing data (vector format data)
is transmitted from PM-1, the screen on the right
side is displayed, and the needle entry diagram
of the transmitted data is displayed in the center
of the screen. The display color of the needle
entry diagram is different according to the thread
tension value.
② Edit the vector parameter.
For the vector format data transmitted from PM-
1, three items below can be set.
A : Thread tension
B : X scale rate or X actual size value
C : Y scale rate or Y actual size value
* To input the scale rate or to input the actual size
value can be set with memory switch U64.
→ Refer to
23. CHANGING MEMORY SWITCH DATA, p.68.
PM-1
IP-410
Transmit
data
A
B
E
122
C