JUKI IP-310/ACF-172-1790 Instruction Manual page 125

Error
code
E11
E1
E1
E1
E1
E3
E
E
E3
Description of error
Bobbin thread trimmer motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
Abnormality of communication between operation
panel and main CPU
When abnormality occurs in data communication.
Abnormality of communication between main CPU and
main shaft CPU
When abnormality occurs in data communication.
Failure of communication between operation panel
and personal computer
When abnormality occurs in data communication.
Abnormality of temperature of heat sink for main
control p.c.b.
When temperature of heat sink of main control p.c.b. is
°C or more.
Defectiveness of EEP-ROM of main control p.c.b.
When data writing to EEP-ROM is not performed.
Defectiveness of writing to EEP-ROM of head relay
p.c.b.
When data writing to EEP-ROM is not performed.
Abnormality of F ROM.
When deletion or writing of F ROM is not performed at
the time of downloading program.
When carriage does not pass sensor even when three
seconds or more have passed from command to move
carriage to Preset side.
− 12 −
How to Place of
recover recovery
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.