Using Check Program; Displaying The Check Program Screen - JUKI IP-310/ACF-172-1790 Instruction Manual

5-3. Using check program

5-3-1. Displaying the check program screen

When MODE key
seconds, CHECK PROGRAM button
displayed on the screen.
For the check program, there are  items below.
Needle thread trimmer origin adjustment
5-3-2. Performing needle thread
→ Refer to
trimmer origin adjustment,p.130.
Bobbin thread trimmer origin adjustment
5-3-3. Performing bobbin thread
→ Refer to
trimmer origin adjustment,p.131.
Sensor check
5-3-4. Performing sensor
→ Refer to
LCD check
5-3-5. Performing LCD
→ Refer to
Touch panel compensation
5-3-6. Performing touch panel
→ Refer to
compensation,p.135.
is held pressed for three
(A) is
check,p.132.
check,p.134.
− 12 −
A