Table of Contents
Advertisement
Button and display
A
SEWING MACHINE START
switch
B
LBH PATTERN DATA
AUTOMATIC TURN button (to
return)
C
ACF PATTERN NO. AND
SEWING ORDER display
D
KNIFE CANCEL button
E
PRESSER DOWN button
F
BOBBIN WINER button
G
LBH CONTINUOUS STITCHING
PATTERN NO. display
H
STEP STITCHING button
I
WITH/WITHOUT DOUBLE
STITCHING display
J
NUMBER OF TIMES OF
BASTING display
K
NEEDLE THREAD TENSION
display
L
NUMBER OF TOTAL STITCHES
display
M
COUNTER VALUE CHANGE
button
N
COUNTER CHANGE OVER
button
O
OVEREDGING WIDTH, LEFT
display
P
KNIFE GROOVE WIDTH, LEFT
display
Sewing of the selected LBH pattern is started.
LBH pattern data which are used in ACF pattern data being selected at
present are automatically turned.
ACF pattern No. and the present sewing order are displayed.
Every time the button is pressed, dropping/non-dropping knife is changed
over alternately.
Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the presser
down screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
1-6. Winding bobbin
→ Refer to
LBH continuous stitching data No. during sewing is displayed.
When the button is pressed, the step stitching screen to check the needle
entry point and to perform re-sewing is displayed.
2-4. Performing re-sewing under LBH
→ Refer to
With/without double stitching which is set to LBH pattern data during sewing
is displayed.
Number of times of basting which is set to the LBH pattern data during
sewing is displayed.
Needle thread tension which is set to the LBH pattern data during sewing is
displayed.
Number of total stitches of the LBH continuous stitching data during sewing
is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to
1-7. Using
counter,p.18.
Display of sewing counter/No. of pcs. counter can be changed over.
1-7. Using
counter,p.18.
→ Refer to
Overedging width, left which is set to the LBH pattern data during sewing is
displayed.
Knife groove width, left which is set to the LBH pattern data during sewing is
displayed.
− −
Description
thread,p.17.
mode,p.39.
Advertisement
Table of Contents
