JUKI IP-310/ACF-172-1790 Instruction Manual page 33

Button and display
A LBH PATTERN NEW REGISTER
button
B LBH PATTERN COPY button
C LBH PATTERN DATA
AUTOMATIC TURN button (to
return)
D ACF PATTERN No. AND
SEWING ORDER display
E LBH PATTERN DATA
AUTOMATIC TURN button (to
advance)
F PRESSER DOWN button
G BOBBIN WINDING button
H LBH PATTERN SELECION
button
Ⅰ NEEDLE THREAD TENSION
SETTING button
J OVEREDGING WIDTH, LEFT
SETTING button
K KNIFE GROOVE WIDTH, LEFT
SETTING button
LBH pattern No. new register screen is displayed.
2-5. Performing new register of LBH
→ Refer to
LBH sewing data copy screen is displayed.
→ Refer to 2-11. Copying LBH sewing
LBH pattern data used in the ACF pattern data being selected at present is
automatically turned.
ACF pattern No. being selected and sewing order are displayed. LBH
pattern Nos. which are set in the displayed sewing order are in the state of
selection.
LBH pattern data used in the ACF pattern data being selected at present is
automatically turned.
Presser down screen is displayed and the needle moves to the right side. To
raise the presser, press the presser up button displayd in the presser down
screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
1-6. Winding bobbin
→ Refer to
LBH pattern No. being selected at present is displayed on the button, and
when the button is pressed, the LBH pattern No. change screen is displayed.
2-2. Performing LBH pattern No.
→ Refer to
Needle thread tension value which is set to LBH pattern data being selected
at present is displayed on the button, and when the button is pressed, the
needle thread tension change screen is displayed.
2-9. Changing needle thread
→ Refer to
Overedging width, left which is set to LBH pattern data being selected at
present is displayed on the button, and when the button is pressed, the
overedging width, left change screen is displayed.
Knife groove width, left which is set to LBH pattern data being selected at
present is displayed on the button, and when the button is pressed, the knife
groove width, left change screen is displayed.
− 32 −
Description
pattern,p.41.
pattern,p.61.
thread,p.17.
selection,p.36.
tension,p.58.