JUKI IP-310/ACF-172-1790 Instruction Manual page 11

Button and display
K SEWING ORDER display
L PATTERN BUTTONHOLE No.
INPUT button
M ACF PATTERN NAME display
N ACF MODE AND LBH MODE
CHANGEOVER button
O JUMP FEED AMOUNT INPUT
button
P FEED AMOUNT INPUT button
Q TURN PAGE button
Sewing order of the sewing data displayed on the right-hand side is
displayed.
LBH sewing data No. registered to ACF pattern being selected at present
is displayed on this button and when this button is pressed, LBH sewing
data No. can be changed.
Name registered to ACF pattern No. being selected is displayed.
1-11. Naming the
→ Refer to
When this button is pressed down, LBH data input screen is displayed and
operation or setting of the single unit of the sewing machine is possible.
2. OPERATION OF THE SINGLE UNIT OF SEWING
→ Refer to
MACHINE AND SETTING PROCEDURE (LBH
Inputted jump feed amount is displayed on the button. In addition, when
the button is pressed down, the jump feed amount input screen is
displayed and edit of data can be performed. This button is displayed only
when with/without jump feed input selection of memory switch data (level
) is ON.
2-17-2. Memory switch data
→ Refer to
When this button is pressed down, the feed amount input screen is
displayed and edit of the data can be performed.
displayed only when  or more of the sewing patterns are registered and it
is possible to observe the sewing data not displayed on the sewing screen.
− 10 −
Description
pattern,p.30.
MODE),p.31.
list,p.80.