Changeover Of Men's And Ladies' Wear - JUKI IP-310/ACF-172-1790 Instruction Manual

1-10. Changeover of men's and ladies' wear.

Perform changeover of men's and ladies' wear since men's and ladies' wear are different in the carriage
direction of sewing products.
1 Display ACF data input screen.
Display the ACF data input screen (pink) of ACF
pattern No. you desire to sew.
2 Perform changeover of men's and ladies' wear.
When MEN'S/LADIES' WEAR SELECT button
(A) is pressed, changeover of men's and
ladies' wear can be performed.
Men's wear :
Ladies' wear :
【 Setting procedure of cloth 】
In case of men's wear, the position where sewing products are preset is the sewing start position of the
first sewing pattern. In case of ladies' wear, the place moved to the right-hand by 00 mm from the
position where sewing products are preset is the sewing start position of the first sewing pattern. For
both men's and ladies' wear, the sewing start position can be moved to the left-hand or right-hand by
jump feed before sewing
(Reference)
) Loosen thumbscrew 3 of gauge 2 of preset
table 1 , move to the set place of scale 4 and fix
it.
) Afterwards, adjust top end C of cloth to inside D
of the pointer and set the cloth to position it. (For
the ladies' wear, similarly adjust with the pointer
and scale on the left side.)
.
Setting
paper
1
− 2 −
A
2 3
Needle
D
4
C
(Ladies' garment body)
2
3
D
C
(Men's garment body)