Table of Contents
Advertisement
2-8-2. Table of presser type
Make the number in the frame of engraved part number of presser foot correspond to the type of presser.
＊ Set type 5 when using the presser foot other than type 1 to 3. Change
Presser size length of the memory switch (level 1) to adjust to the presser to be used.
.2-17. Changing memory switch
Refer to
＊ When using type 5 with stitch width of 6 mm or more and 41 mm or more in length, it is necessary to
replace components such as presser arm, feed plate, etc.
Type
Part No. of presser foot
Type 1
B 1 5 1 1 7 7
1
Type 2
B 1 5 1 1 7 7
2
Type 3
B 1 5 1 1 7 7
3
Type 5
-
data,p.78.
0 0 0 ＊
0 0 0 ＊
0 0 0 ＊
− 57 −
Presser size width and
Advertisement
Table of Contents
