Table of Contents
Advertisement
1-11. Naming the pattern
As many as 1 characters can be inputted in each ACF pattern.
1 Display the ACF data input screen.
Only in case of the ACF data input screen (pink),
it is possible to input the name of pattern.
2 Call the character input screen.
Press ACF PATTERN NAME setting button
(A) and the character input screen is displayed.
3 Input the character.
Press CHARACTER button (B) you desire to
input and the input of character can be performed.
As many as 1 characters of characters (A to Z
and 0 to ) and symbols (+, -, /, #, ,, .) can be
inputted.
In case of inputting between characters, the
inputted character is inserted.
The cursor can travel with CURSOR LEFT
TRAVEL button
TRAVEL button
delete the inputted character, adjust the cursor to
the position of the character you desire to delete
and press DELETE button
4 Finish inputting the character.
Press ENTER button
character is finished. After the finish, the inputted
character is displayed on the upper part of the
ACF data input screen (pink).
(C) and CURSOR RIGHT
(D). When you desire to
(E).
(F) and inputting the
B
− 30 −
A
F
C
D
E
Advertisement
Table of Contents
