Table of Contents
Advertisement
Button and display
A
ACF PATTERN NEW REGISTER
button
B
ACF PATTERN COPY button
C
ACF PATTERN NAME SETTING
button
D
EQUAL INTERVAL INPUT button Number of buttonholes input screen is displayed and ACF pattern data
E
PRESSER DOWN button
F
BOBBIN WINDER button
G
ACF PATTERN SELECTION
button
H
NUMBER OF BUTTONHOLES
REGISTERED
I
MEN'S/LADIES' WEAR
SELECTION button
J
PAIR STACKING ON/OFF
SELECTION button
ACF pattern No. new register screen is displayed.
1-8. Performing new register of ACF
→ Refer to
ACF pattern No. copy screen is displayed.
→ Refer to
1-9. Copying ACF
Sewing pattern name input screen is displayed.
1-11. Naming the
→ Refer to
being selected at present can be edited.
1-8-1. 6 Input the number of
→ Refer to
Presser down screen is displayed and the needle moves to the right side. To
raise the presser, press the presser up button displayd in the presser down
screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
1-6. Winding bobbin
→ Refer to
ACF pattern No. being selected at present is displayed on this button and
when this button is pressed, ACF pattern No. selection screen is displayed.
1-4. Performing ACF pattern
→ Refer to
Number of buttonholes registered to ACF pattern No. being selected at
present is displayed.being selected at present.
Every time this button is pressed down, men's and ladies' wear can be
changed over alternately.
→ Refer to
1-10. Changeover of men's and ladies'
Every time this button is pressed down, pair stacking ON/OFF can be
changed over. This button is displayed only when the pair stacking use
setting of memory switch data (level 1)
2-17. Changing memory switch
→ Refer to
− −
Description
pattern.,p.21.
pattern,p.27.
pattern,p.30.
buttonholes,p.22.
thread,p.17.
selection,p.14.
wear.p.29.
is ON.
data,p.78.
Advertisement
Table of Contents
