Figure 41 Removing the Server Blade from the Enclosure
4.
Place the server blade on a flat, level, antistatic surface.
CAUTION:
blade blank. Operating the enclosure without a server blade or server blade blank causes
improper airflow and cooling, which can lead to thermal damage.
Replacing the Server Blade in the Enclosure
Use the following procedure to replace the server blade into the enclosure:
1.
Slide the server blade back into the enclosure (1).
See
Figure 42 (page
2.
Close the lever (2).
Always populate server blade enclosure bays with either a server blade or server
116).
Removing and Replacing the Server Blade from the Enclosure
1 15