Example 18 info boot command
Shell> info boot
BOOT INFORMATION
Monarch CPU:
Current
Monarch
--------
AutoBoot: on - Timeout is : 7 SEC
Boottest:
boottest
OS is not speedy boot aware.
Selftest
----------
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
ioconfig
Use this command to deconfigure or reconfigure I/O components or settings.
Syntax
ioconfig <fast_init | mps_optimize | wol> <on | off>
Parameters
<fast_init>
<mps_optimize> specifies PCIe MPS optimization setting
<wol>
<on | off>
Operation
The ioconfig file is used to retain information on system's I/O configuration across reboots. The
ioconfig file is created by insf at install time; and is modified by insf, rmsf, and ioscan
when devices are added or removed. The only purpose of the ioconfig file to maintain
configuration information when the system is not running.
160 Utilities
Preferred
Monarch
Possible Warnings
---------
------------------
0
0
Settings Default Variable
Setting
--------------
Skip this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
specifies device connection policy setting
specifies system wake-on-lan setting
specifies to configure or deconfigure a feature or component