IBM System x3650 M3 4255 Service Manual page 167

Problem determination and service guide
Hide thumbs Also See for System x3650 M3 4255:
Table of Contents

Advertisement

Table 10. Integrated management module error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, "Parts listing, Types 4255, 7945, and 7949 server," on page 157 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
The Chassis Event Log (CEL) on
system %1 cleared by user %2.
(%1 = CIM_ComputerSystem
.ElementName; %2 = user ID)
IMM reset was initiated by user
%1.
(%1 = user ID)
ENET[0] DHCP-HSTN=%1,
DN=%2, IP@=%3, SN=%4,
GW@=%5, DNS1@=%6.
(%1 = CIM_DNSProtocol
Endpoint.Hostname;
%2 = CIM_DNSProtocol
Endpoint.DomainName;
%3 = CIM_IPProtocol
Endpoint.IPv4Address;
%4 = CIM_IPProtocolEndpoint.
SubnetMask;
%5 = IP address, xxx.xxx.xxx.xxx;
%6 = IP address, xxx.xxx.xxx.xxx)
ENET[0] IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3, GW@=%4.
(%1 = CIM_DNSProtocol
Endpoint.Hostname;
%2 = CIM_StaticIPSettingData.
IPv4Address;
%3 = CIM_StaticIPSettingData.
SubnetMask;
%4 = CIM_StaticIPSettingData.
DefaultGatewayAddress)
LAN: Ethernet[0] interface is no
longer active.
LAN: Ethernet[0] interface is now
active.
DHCP setting changed to by user
%1.
(%1 = user ID)
IMM: Configuration %1 restored
from a configuration file by user
%2.
(%1 = CIM_ConfigurationData.
ConfigurationName;
%2 = user ID)
Info
A user has cleared the IMM event
log.
Info
A user has initiated a reset of the
IMM.
Info
The DHCP server has assigned
an IMM IP address and
configuration.
Info
An IMM IP address and
configuration have been assigned
using client data.
Info
The IMM Ethernet interface has
been disabled.
Info
The IMM Ethernet interface has
been enabled.
Info
A user has changed the DHCP
mode.
Info
A user has restored the IMM
configuration by importing a
configuration file.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
Chapter 3. Diagnostics
149

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x3650 m3 7945System x3650 m3 7949

Table of Contents