Installing the fan bracket
To install the fan bracket, complete the following steps.
1. Lower the fan bracket into the chassis.
2. Align the holes in the bottom of the bracket with the pins in the bottom of the
3. Press the bracket into position until the fan-bracket release levers click into
4. Replace the fans (see "Installing a hot-swap fan" on page 224).
5. Replace the PCI riser-card assemblies and the DIMM air baffle (see "Installing a
6. Install the cover (see "Installing the cover" on page 178).
7. Slide the server into the rack.
8. Reconnect the external cables; then, reconnect the power cords and turn on the
184
IBM System x3650 M3 Types 4255, 7945, and 7949: Problem Determination and Service Guide
chassis.
place.
PCI riser-card assembly" on page 189 and "Installing the DIMM air baffle" on
page 182).
peripheral devices and the server.