Getting Printer Information Over The Network; Current Printer Status - Ricoh MLP36n Manual

Getting Printer Information over the Network

This section explains details of each item displayed in the printer status and information.

Current Printer Status

The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.
• mshell: Use the "status" command.
Messages
Access Restricted
Adjusting...
Call Service Center
Canceled
Canceling Job...
Configuring...
Cooling Down Fusing Unit...
Cover Open: Duplex Unit
Cover Open: Front Cover
Empty: Black Toner
Energy Saver Mode
Error
Error: DIMM Value
Error: Ethernet Board
Error: HDD Board
Error: Optional Font
Error: Parallel I/F Board
Getting Printer Information over the Network
Description
The job was canceled because user have no
authority.
The printer is initializing or calibrating.
There is a malfunction in the printer.
The job is reset.
The job is being reset.
Setting is being changed.
Fusing unit is cooling down.
The cover of the duplex unit is open.
The front cover is open.
The black toner cartridge is almost empty.
The printer is in Energy Saver Mode.
An error has occurred.
A memory error occurred.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An error has occurred in the font file of the printer.
An error has occurred in the parallel interface.
6
231