Setting User Paper Types To Trays - Ricoh MLP36n Manual

4. Using Paper Types that have Unique Names

Setting User Paper Types to Trays

Before printing, set the paper registered on the user paper type to the paper tray, and then set the paper
type already registered. Paper types can be set either from Web Image Monitor or from the printer's control
panel.
1. Log on to Web Image Monitor in administrator mode.
2. In the menu area, click [Configuration].
3. On the [Device Settings], click [Paper].
4. Set the paper tray you want to use as a user paper type, and then select the registered paper
type.
4
The example below is for printing invoices.
The registered paper type "Invoice A" is displayed as [+ Invoice A (Custom x)] on this screen. Select
[+ Invoice A (Custom x)] for [User Paper Type]. Make the appropriate changes to other settings as
required.
5. Click [OK].
6. Click [Logout].
7. Quit Web Image Monitor.
• For details about loading paper, see "Loading Paper", Hardware Guide.
• For details about setting the paper type from control panel, see "Specifying a Paper Type for Tray 1
and the Optional Paper Feed Unit" and "Specifying a Paper Type for the Bypass Tray", Hardware
Guide.
130