Ricoh MLP36n Manual page 74

4. Configuration
1. Press the [Menu] key.
4
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [
3. Press the [ ] or [ ] key to display [Network Setup], and then press the [
4. Press the [ ] or [ ] key to display [Active Protocol], and then press the [
5. Press the [ ] or [ ] key to set the network protocol, and then press the [
6. Press the [ ] or [ ] key to display [Active] or [Not Active], and then press the [
Set other protocols you need to set in the same way.
• Select [Not Active] for unused protocols.
• Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
54
AUB051S
Enter] key.
Enter] key.
Enter] key.
Enter] key.
Enter] key.