Adjusting The Printer; Adjusting The Image Density - Ricoh MLP36n Manual

8. Adjusting the Printer

Adjusting the Image Density

You can adjust the image density using the control panel if the image density is not appropriate.
• Extreme settings may create printouts that appear dirty.
• Image Density settings should be made from the application or the printer driver whenever possible.
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [
3. Press the [ ] or [ ] key to display [Image Density], and then press the [
4. Press the [ ] or [ ] key to specify the image density, and then press the [
You can specify the image density in the range of -3 to +3.
5. Press the [Online] key.
The initial screen appears.
AUB051S
8
Enter] key.
Enter] key.
Enter] key.
139