Ricoh MLP36n Manual page 18

Press the { { { { { Menu} } } } } key. Specifying a Network
Address
7* # 5
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
[Host Interface], and then press the
{ { { { { Enter} } } } } key.
{ { { { {
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
[Network setup], and then press the
{ { { { { Enter} } } } } key.
{ { { { {
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
[IPv4 Settings], and then press the
{ { { { { Enter} } } } } key.
{ { { { {
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
[DHCP], and then press the
{ { { { { Enter} } } } } key.
{ { { { {
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to set [On] or
[Off], and then press the { { { { { Enter} } } } } key.
Press the { { { { { Menu} } } } } key to return to the
initial screen.
Print a configuration page to confirm
Set other protocols you need to set in the same way.
the settings made.
• Select [Not Active] for unused protocols.
• Enable IPv4 to use the Pure IPv4 environment of
NetWare 5/5.1, NetWare 6/6.5.
• For details about printing the configuration page, see
"Printing the Test Page".
G1768611_SincereP1-EN-F1.p65 4
Press the { { { { { Escape} } } } } key until the screen
returns to the [Network Setup] menu.
If you use IPv4, assign the IPv4 address
to the printer. Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key
Press the { { { { { Menu} } } } } key.
to display [IPv4 Settings], and then press
the { { { { { Enter} } } } } key.
To get the IPv4 address for the printer, contact your
network administrator.
7* # 5 To specify the IPv4 Address, press the
{ { { { { ▼} } } } } or { { { { { ▲} } } } } key to display [IP v4 Ad-
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
dress], and then press the { { { { {
[Host Interface], and then press the
Enter} } } } } key.
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to enter the
address, and then press the { { { { {
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
key. Settings made.
[Network setup], and then press the
Enter} } } } } key.
Press the {▼} or {▲} key to enter the left most entry
field of the address. After entering the left field, press
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to display
the {
Enter} key, and then you can enter the next
[Active Protocol], and then press the
field. After completing to enter in the all fields, press
Enter} } } } } key.
the { Enter} key. Use this
method to assign Subnet Mask and Gateway Address.
• Do not set "011.022.033.044" as the IPv4 address.
• The value moves by 10 if the {▼} or {▲} key is
kept pressed.
• Set Subnet Mask and the Gateway address in the
same way.
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to select the
network protocol, and then press the
Enter} } } } } key.
Press the { { { { { Menu} } } } } key to return to the ini-
tial screen.
Print a configuration page to confirm the
settings made.
Press the { { { { { ▼} } } } } or { { { { { ▲} } } } } key to set
[Active] or [Not Active], and then press
the { { { { { Enter} } } } } key. • For details about printing the configuration page, see
"Printing the Test Page".
MLP31n/MLP36n/P7031n/P7035n/LP131n/LP136n/Aficio SP 4100N/Aficio SP 4110N
Installing the Printer Driver
You can install the printer drivers and software easily
from the CD-ROM labeled "Printer Drivers and Utili-
ties".
Click [Quick Install] in the window of the CD-ROM
to install PCL and RPCS printer drivers. To install the
PostScript 3 printer driver, click the [PostScript 3 Printer
Driver] button. For more information about the
PostScript 3 printer driver, see Software Guide.
When the TCP/IP protocol is used, SmartDevice Moni-
tor for Client will be installed as well.
When using with TCP/IP protocol, confirm the
followings:
The printer is connected to a network with the
interface cable.
Enter} } } } } key.
The TCP/IP protocol is set.
The IP (IPv4) address is set for the printer and the
computer.
• To install printer driver under Windows 2000/XP
Professional, and Windows Server 2003/2003 R2,
Enter} } } } }
you must have an account that has Manage Printers
permission. Log on as an Administrator.
• Only the printer driver, and not the SmartDevice
Monitor for Client is installed when using this printer
under USB or parallel. If you connect using USB,
see Software Guide.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM
drive.
The installer starts.
Auto Run may not work with the certain operating
system settings. If this happens, launch
"Setup.exe" on the CD-ROM root directory.
Select an interface language, and then click
[OK].
The default interface language is English.
06.12.8, 11:45 AM
Quick Installation Guide
Click [Quick Install]. Click [Finish].
The software license agreement appears in the A message about restarting the computer may ap-
[License Agreement] dialog box. pear. Restart the computer to complete installation.
Click [Exit] in the first dialog box of the
installer, and then take out the CD-ROM.
This is an example when English is selected in step .
After reading through all of the contents,
click [I accept the agreement] to agree with
the License Agreement, and then click
[Next >].
• To stop installation of the selected software, click
[Cancel] before installation is completed.
Select the printer model you want to
install in the "Select Printer" dialog box.
• Quick Install is not available unless bidirectional com-
munication between the printer and computer is
enabled via parallel connection. For details about
bidirectional communication between printer and
computer, see "Printing with Parallel Connection",
Software Guide.
• For a network connection via TCP/IP, select the printer
whose IP address is displayed in [Connect to].
• For parallel connection, select the printer whose
printer port is displayed in [Connect to].
Click [Install].
The following display appears while installing the
printer driver.
Copyright © 2006
Printed in China
EN
Quick Installation Guide
Next Sheet
USA G176-8611
2/2