Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003/2003 R2) - Ricoh MLP36n Manual

1. Preparing for Printing
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
1
6. Click [Network printer], and then click [Next >].
7. Select the location method from the [Locate Your Printer] screen, and then click [Next >].
8. Double-click the computer name you want to use as a print server in the [Shared printers:]
box.
9. Select the printer you want to use, and then click [Next >].
10. The printer driver installation starts.
11. Click [Next >].
Select the [Yes] check box to configure the printer as default.
12. Click [Finish].
Restart the computer to complete installation.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
• A User Code can be set after the printer driver installation. For information about User Code, see the
printer driver Help.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003/2003 R2)
• Installing this printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
• If you print from a print server connected to the printer using the SmartDeviceMonitor port, the client
cannot use Recovery Printing and Parallel Printing.
• If you print with a Windows XP or Windows Server 2003/2003 R2 print server,
SmartDeviceMonitor notification functions may not be possible for the client.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
46