Setting A Password - Ricoh MLP36n Manual

6. Monitoring and Configuring the Printer
2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
A list of printers using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
3. Select the printer whose settings you want to make.
To make settings for all printers in the selected group, select no printer.
4. On the [Group] menu, point to [Energy Save Mode], point to [Set Individually] to make the
settings for only the selected printer or point to [Set By Group] to make the settings for all
printers in the selected group, and then click [On] or [Off].
5. Quit SmartDeviceMonitor for Admin.
• For details about the setting value for Energy Saver mode, see SmartDeviceMonitor for Admin Help.
6

Setting a Password

Follow the procedure below to set a password.
1. Start SmartDeviceMonitor for Admin.
2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
A list of printers using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
3. In the list, select a printer whose configuration you want to change.
4. On the [Tools] menu, click [NIB Setup Tool].
A Web browser opens and the dialog box for entering the password for the Web Image Monitor
administrator appears.
NIB Setup Tool starts when the network interface board is default. Follow the instruction on the screen.
5. Enter the login user name and password, and then click [Login].
For details about the user name and password, consult your administrator.
Top Page of Web Image Monitor appears.
6. Click [Configuration].
7. On the [Device Settings], click [Program/Change Administrator], and then change the
settings.
8. Click [OK].
184