Ricoh MLP36n Manual page 386

5. Making Printer Settings Using the Control Panel
• WPA
Encrypt. Meth.
Authent. Meth.
5
PSK Entry: 8 to 63 characters can be entered.
• Default: None
• The WEP key can also be set using Web Image Monitor. For details, see Web Image
Monitor Help.
Fixed USB Port
• On
• Off
• Default: Off
• The service engineer sets this function. Do not change this setting.
162
• Change (HEX): Enter the WEP key using a hexadecimal number sequence. When
using 64 bit WEP, enter 10 ASCII characters. When using 128 bit WEP, enter 26
ASCII characters.
• Change (ASCII): Enter the WEP key using an ASCII character sequence. When using
64 bit WEP, enter 5 ASCII characters. When using 128 bit WEP, enter 13 ASCII
characters.
• TKIP
• COMP(AES)
• WPA-PSK: From 8 to 63 ASCII characters can be entered.
• WPA: When selecting this method, obtain a certificate using Web Image Monitor.
• WPA2-PSK: Same as WPA-PSK, 8 to 63 ASCII characters can be entered.
• WPA2: A supplemental specification of WPA. Fully compatible with IEEE802.11i.