Ricoh MLP36n Manual page 96

5. Paper and Other Media
Input Paper Sizes Paper Feed Unit (Tray 2/3)
A4 , B5 JIS , A5 , 8
The following sizes are supported but not indicated on the tray dial. You should set the tray dial to
" ", and select the paper size with the control panel.
1 1
7 / × 10
4
1
10 / (16K)
2
Tray 2/3 supports custom size paper, approximately 139.7 - 216 mm (5.50 - 8.50 inches) in width,
5
and 139.7 - 356 mm (5.50 - 14.01 inches) in length.
Input Paper Sizes Bypass Tray
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
A4 , B5 JIS , A5
1
10 / (Executive) , 8
2
, C5 Env , C6 Env , DL Env , Monarch Env , 7.68 × 10
Bypass Tray supports custom size paper, approximately 64 - 216 mm (2.52 - 8.50 inches) in width,
and 139.7 - 432 mm (5.50 - 17.01 inches) in length. Set as custom size using control panel.
The supported size may differ depending on the printer language you use.
See p.85 "Loading Paper".
Input Paper Sizes Envelope Feeder Unit
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Com#10 Env , C5 Env , C6 Env , DL Env , Monarch Env .
See p.85 "Loading Paper".
76
Metric version / Inch version
1
/ × 14(Legal) , 8
2
Metric version / Inch version
1
/ (Executive) , 8 / × 13(Folio) , 8
2 4
Metric version / Inch version
1
, A6 , 8 / × 14(Legal) , 8
2
1
/ × 13(Folio) , 8
4
Metric version / Inch version
1 1
/ × 11(Letter) , 5 /
2 2
1
/ × 13(Foolscap) , 8 × 13(F/GL) , 7.68 ×
2
1
/ × 11(Letter) , 5
2
1
/ × 13(Foolscap) , 8 × 13(F/GL) , Com#10 Env
2
1
/ (16K)
2
1
× 8 /
2
1 1 1
/ × 8 / , 7 /
2 2 4
×