Ricoh MLP36n Manual page 276

1. Preparing for Printing
10. Insert the printer driver.
11. In the [New Hardware Found Wizard] dialog box, click [Install from a list or specific location
(Advanced)], and then click [Next >].
1
12. Select the Specify a location: check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
13. Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [Exit].
14. Specify the location where the printer driver is located, and then click [Next >].
If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:
• RPCS
D:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1
• PCL 5e
D:\DRIVERS\PCL5E\WIN9X_ME\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS\WIN9X_ME\(Language)\DISK1
15. Check the location, and then click [Next >].
Add Printer Wizard starts.
16. Click [Finish].
Installation is complete. If installation is successful, the icon of the printer connected to the "USB001"
port is added to the [Printers] window.
• The number after "USB" varies depending on the number of printers connected.
• It is not necessary to reinstall USB Printing Support when connecting a different printer via USB interface
when USB Printing Support is installed.
• After installing USB Printing Support, if the printer driver is not installed, follow the plug-and-play
instructions of the printer.
• Install the printer driver from the CD-ROM provided with the printer.
52