Ricoh MLP36n Manual page 451

Parameter
psk "character string"
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
username "character string"
username2 "character string"
domain "character string"
password "character string"
Remote Maintenance by telnet
Value configured
wpa: WPA(802.1X) authentication
You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are
settings for the phase 2 method, and must be set
when using EAP-TTLS or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e(31 bytes)
other than "@". The default is blank.
You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes)
other than "@". The default is blank.
You can specify the login domain name for the
Radius server.
Usable characters: ASCII0x20-0x7e (31 bytes)
other than "@". The default is blank.
You can specify the login password for the
Radius server.
6
227