User Code; Paper Size; Fit To Paper - Ricoh MLP36n Manual

9. Mac OS Configuration

User Code

Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users and allows you to check
the number of sheets printed under each code with SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Mac OS
Mac OS X

Paper Size

Use this to select the size of paper you want to use.
The following table shows the tabs or menus where you can select this function.
Mac OS
Mac OS X

Fit to Paper

9
When the size of the document and paper size differ, set whether or not to print according to paper size.
Mac OS
Prompt User
Print is performed with the size of document to be printed unchanged.
Nearest Size and Scale
If the paper size is smaller than the selected paper size, the driver reduces the print size.
If the paper size is larger than the size of document to be printed, print is not to fit the paper size.
Nearest Size and Crop
When the paper size is smaller than the size of document to be printed, print is adjusted to meet the
paper size.
296
Select the [Enable User Code] check box, and then enter a user code
in the [User Code] box on [Job Log] in the print dialog box.
Select the [Enable User Code] check box, and then enter a user code
in the [User Code] box on [Job Log] in the print dialog box.
[Paper:] on the [Page Attributes] tab in the Page Setup dialog box.
[Paper Size:] in the Page Setup dialog box.
[Fit to Paper] on [Printer Specific Options] in the print dialog box.