Ricoh MLP36n Manual page 478

6. Monitoring and Configuring the Printer
SMTPC: no smtp server. connection close.
SMTPC: failed to connect smtp server.
6
SMTPC: username or password wasn't correct.
[response code] (information)
Snmp over IPv4 is ready
Snmp over IPv6 is ready.
Snmp over IPX is ready.
snmpd start.
started.
Started.
Terminated.
254
Message Problem and solutions
number is incorrect. Check the SMTP server name,
port number, or the SMTP server port number.
Connection to the SMTP server failed due to no
response from SMTP. This could be because a
server other than the SMTP server has been
specified, or the specified SMTP server port number
is incorrect. Check the SMTP server name, port
number, or the SMTP server port number.
Connection to the SMTP server failed. This could be
because no connection to the network has been
established, or the network configuration is
incorrect, so there is no response from the SMTP
server, or the specified SMTP server name is
incorrect, or the specified SMTP server IP address
could not be found in the DNS server, or a server
other than the SMTP server has been specified, or
the specified SMTP server port number is incorrect.
Check the DNS Server's IP address and SMTP
server's IP address, or the SMTP server name and
SMTP port number, or the SMTP server's SMTP port
number, or the network connection and
configuration.
Connection to the SMTP server failed, because the
specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Communication over IPv4 with snmp is available.
Communication over IPv6 with snmp is available.
Communication over IPX with snmp is available.
The snmpd service has started.
The direct print service has started.
The bonjour (rendezvous) function is enabled.
The bonjour (rendezvous) function is disabled.