Getting Printer Information Over The Network - Ricoh AP2600 Operating Instructions Manual

Troubleshooting

Getting Printer Information over the Network

Printer current status
You can check the printer's status using the telnet command.
telnet
Use the status command.
UNIX
Use the lpg or lpstat command or stat parameter of rsh, rcp, or ftp.
Reference
For more information, see "Remote Maintenance by Telnet (mshell)" in the
Network Interface Board Operating Instructions is provided as a PDF file
on the CD-ROM labeled "Operating Instructions".
5
Messages
Call Service Center
Call Service Center: SC***-*
Canceling Job...
Cover Open: Duplex Unit
Cover Open: Front Cover
Cover Open: Mailbox
Cover Open: Paper Exit/Rear The paper exit cover or the
Cover Open: Upper Tray
Empty: Toner
Energy Saver Mode
Energy Saver Mode 1
Error: Command Transmis-
sion
68
Description
There is a malfunction in the
printer.
An error has occurred in the
printer.
The printer is canceling the
print job.
The cover of the optional Du-
plex Unit is open.
Close the front cover.
The cover of the Mailbox is
open.
rear cover is open.
The upper tray cover is open.
The toner cartridge is empty.
The printer is in Energy Save
Mode.
An error has occurred in the
engine or controller.
Comments
Turn the printer off and on.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Wait for a while.
Close the cover of the optional
Duplex Unit.
Close the front cover.
Close the cover of the Mailbox
cover.
Close the paper exit cover or
the rear cover.
Close the upper tray cover.
Replace the new toner car-
tridge.
Wait for a while.
First, turn the power switch
off and then on. If the message
appears again, call your sakes
or service representative.