Hardreset Command - Qlogic SANbox 5200 Series User Manual

A

Hardreset Command

Resets the switch and performs a power-on self test. This reset disrupts traffic,
activates the pending firmware, and clears the alarm log. To save the alarm log
before resetting, refer to the
Authority
Admin session
Syntax
hardreset
Notes
To reset the switch without a power-on self test, refer to the
page A-45.
To reset the switch without disrupting traffic, refer to the
page A-36.
59056-03 C
"Set Log Command" on page
A – Command Line Interface
Hardreset Command
A-74.
"Reset Command" on
"Hotreset Command" on
A-33