Removing A Radius Server; Remove Server - Qlogic SANbox 5200 Series User Manual

3 – Managing Fabrics
RADIUS Servers
3.1.2

Removing a RADIUS Server

When you remove a RADIUS server, you disable the management of
authentication usernames and passwords over the network for that server.
To remove a RADIUS server, do the following:
1. Open the faceplate display, open the Switch menu, and select Radius
Servers....
2. In the Radius Server Information dialog, shown in
Remove Server tab.
3. In server list at the top of the dialog, select the server to be removed.
4. Click the Remove Server button to remove the server, and click the Close
button to exit the dialog.
3-4
Figure 3-2. Remove Server
A
Figure 3-2, click the
59056-03 C