Ms Group Member Attributes - Qlogic SANbox 5200 Series User Manual

A – Command Line Interface
Group Command
Member
CTAuthentication
Hash
Secret
copy [group_source] [group_destination]
Creates a new group named [group_destination] and copies the membership into
it from the group given by [group_source].
create [group] [type]
Creates a group with the name given by [group] with the type given by [type]. A
group name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, $, ^, and -. The security database supports a
maximum of 16 groups. If you omit [type], ISL is used. [type] can be one of the
following:
ISL
Configures security for attachments to other switches.
Port
Configures security for attachments to N_Port devices.
MS
Configures security for attachments to N_Port devices that are issuing
management server commands.
A-28
Table A-7. MS Group Member Attributes
Attribute
Port worldwide name for the N_Port device that would attach
to the switch.
Common Transport (CT) authentication. Enables (True) or
disables (False) authentication for MS group members. The
default is False.
The hash function to use to decipher the encrypted Secret
sent by the MS group member. Hash values are MD5 or
SHA-1.
Hexadecimal string that is encrypted by the Hash function for
authentication with MS group members. The string has the
following lengths depending on the Hash function:
Description
MD5 hash: 16-byte
SHA-1 hash: 20-byte
A
59056-03 C