Initial Startup Dialog - Qlogic SANbox 5200 Series User Manual

2 – Using SANsurfer Switch Manager
Starting SANsurfer Switch Manager
To start SANsurfer Switch Manager from SANsurfer Management Suite, do
the following.
1.
2.
3.
The application opens with the Initial Start dialog shown in
not to see this dialog, check the Don't show this dialog again box. This has the
same effect as disabling the Display Initial Startup Dialog preference. Refer to
"Setting SANsurfer Switch Manager Preferences" on page 2-16
about setting preferences.
2-10
Start the SANsurfer Management Suite application using one of the
following methods:
For Windows, double-click the SANsurfer shortcut, or select
SANsurfer from Start menu, depending on how you installed the
SANsurfer application. From a command line, enter the following
command:
<install_directory>\SANsurfer.exe
For Linux or Solaris enter the SANsurfer command:
<install_directory>./SANsurfer
From the SANsurfer Management Suite home page, click the
SANsurfer Switch Manager button.
In the Initial Start dialog, click the Open Configuration Wizard button.
When you power up the switch, the Configuration Wizard will
recognize the switch and lead you through the configuration process.
Figure 2-1. Initial Startup Dialog
A
Figure 2-1. If you prefer
for information
59056-03 C