Table of Contents
Advertisement
2 From the menu, choose Cut. The rule is deleted.
Use the following procedure to delete more than one rule.
1 From either list, mark the rules that are to be deleted using the procedures
2 Right-click one of the marked rules and choose Cut all marked. All marked rules are deleted.
NOTE
A policy must contain at least one rule. If the user attempts to delete all rules or the last rule from a policy, the
changes will not be saved.
NOTE
The EPM does not support "undo."
Modifying Rules
The following changes can be made to an existing rule
Renaming a Rule
To change the name of a rule, use the following procedure:
1 In the Rule Editing and Viewing Panel or the Rule Navigator window, right-click a rule and from the
menu displayed, choose Rename. The following dialog box is displayed.
2 Enter a new name and click OK. The new name is displayed in the rule viewing panels.
Reclassifying a Rule
To change the class of a rule, use the following procedure:
1 Right-click a rule and from the menu displayed, choose Reclassify. A submenu displays available
classes from which to choose or offers the choice to <create a new class>.
2 When <create a new class> is chosen, the following Class Entry Dialog box is displayed.
3 Enter a new class name and click OK. The new class is added to the rule viewing panels and the
rule classification is changed.
Extreme Networks Policy Manager (EPM) 1.2 User Guide
Modifying Rules
on page
44.
45
Advertisement
Table of Contents
