Modify Rule Parameters - Extreme Networks Policy Manager User Manual

Supervisor edition

Table of Contents

8 Click the Show All command button again to show only the currently edited policy.

9 Close the dialog box.

Modify Rule Parameters

To modify any of the existing rule parameters, use the following procedure. For this example, in the

CF_TCP_THRESHOLD rule, the argument of 100 packets for the "count" parameter is changed to 200

packets.

1 Open the policy "Example_TCP_Threshold.pol."

2 In the Rule Editing and Viewing Panel, select the rule, "CF_TCP_THRESHOLD." In the Rule

Properties Panel under the Rule Parameters tab, the parameters are displayed.

3 In the Rule Parameters, under "Match Conditions" click "count TCP_COUNTER>100, period 5,

hysteresis 0;" All the icons under the text panel are enabled.

4 Click the "Edit arguments of selected" icon

shown below.

Extreme Networks Policy Manager (EPM) 1.2 User Guide

Example 1—Example_TCP_Threshold.pol

. The Rule Parameter Editor dialog box is displayed as

Table of Contents

Do you have a question about the Policy Manager and is the answer not in the manual?

Policy manager supervisor edition 1.2