Extreme Networks Policy Manager User Manual page 51

4 Continue the process, selecting additional ports (egress or ingress) and VLANs as desired. All are
displayed in the Policy Activity Manager dialog box.
5 When all desired ports and VLANs have been selected, click the now enabled Commit command
button and when the process is completed, Close the box. Under the Rule Activity tab, the port and
VLAN commitments are shown.
To view all the policies that are currently committed to the ports or VLANs, use the following
procedure.
1 Choose Policy > Activity... to open the Policy Activity Manager dialog box.
2 Click the Show All command button to view the following dialog box. The Show All button is a
toggle button that, when selected, shows the VLANs and ports that are activated for policies other
than the policy that is currently loaded in the EPM. All VLANs and ports that are active for the
current policy are shown in black, and all other active VLANs and ports are shown in red.
The Active Vlans field displays the name of each active VLAN, the direction (egress or ingress), and
the name of the policy activated on that VLAN.
The Active Ports field displays the number of each active port, the direction, and the name of the
policy activated on that port.
3 To return to the current policy only, click the Show All button again.
To modify these commitments, use the following procedures:
1 Choose Policy > Activity... to open the Policy Activity Manager dialog box. The commitments for
the current policy are shown.
2 The deactivate command buttons show the available options. Click the desired option (Deactivate
Ingress, Deactivate Egress, Deactivate Selected, or Deactivate All) then click the Commit command
button. The policies are deactivated.
Extreme Networks Policy Manager (EPM) 1.2 User Guide
Managing Policy Activity
51