Saving A Policy - Extreme Networks Policy Manager User Manual

Use the following procedure to add a new rule in a given position in the listing. For example, add a
new # 005 after # 004.
1 In the Rule Editing and Viewing Panel, right-click anywhere in the # 004 row. A menu is displayed.
2 Choose Insert new rule (after). The Rule Wizard opens.
3 Follow Step 2 through Step 14 above.

Saving a Policy

Policies can be saved to a local file or to a switch.
To save to a local file:
1 From the Menu Bar, choose File > Save As > Local. The Save box opens.
2 In the File Name: field, type a new policy name ending in ".pol" and click Save. A Validation
Notice box is displayed that confirms the Policy rules were successfully saved and the new policy
name in displayed in the Tree Structure Panel, followed by "(localfile)."
To save to a switch:
1 From the Menu Bar, choose File > Save As > Switch. The Remote Switch Dialog box opens as
shown below.
2 Enter the required information (described
shown below.
3 In the Name text field, you have three options:
a Use the policy name of the local file you are saving that EPM displays in the text field, or
b TypeS a new policy name in the text field, or
Extreme Networks Policy Manager (EPM) 1.2 User Guide
on page 31) and click OK. A Policy Entry box opens as
Saving a Policy
39