Extreme Networks Policy Manager User Manual page 74

Help Messages
svid:
Modifies the S-VID value. In the field, the value must be a positive integer number.
traffic-queue:
Places the traffic on the specified traffic-queue (Black Diamond 12804R only)
uplinkport:
Modifies the uplink port. In the first field, enter "tagged" or "untagged" or leave it empty for all traffic.
In the second field, enter a single number or a list separated by commas.
redirect:
Used to redirect packets (BlackDiamond 10K and BlackDiamond 12804 Only). Packets are forwarded to
the IPv4 address specified, without modifying the IP header. The IPv4 address must be in the IP ARP
cache, otherwise the packet is forwarded normally. Only fast path traffic can be redirected. This
capability can be used to implement Policy Based Routing. You may want to create a static ARP entry
for the redirection IP address, so that there will always be a cache entry.
mirror:
Sends a copy of the packet to the monitor (mirror) port (ingress only).
mirror-cpu:
Mirrors a copy of the packet to the CPU in order to log it.
replace-dscp:
Replace the packets DSCP field with the value from the associated QoS profile.
replace-dot1p:
Replace the packets 802.1p field with the value from the associated QoS profile.
log:
Logs the packet header.
log-raw:
Logs the packet header in hex format.
meter:
The meter keyword allows you to associate a meter with an ACL. The meter must be created outside of
the EPM using the command line.
74
Extreme Networks Policy Manager (EPM) 1.2 User Guide