Opening A Policy File From A Switch - Extreme Networks Policy Manager User Manual

Opening a Policy File from a Switch

1 Ensure that your TFTP server is open.
2 From the EPM menu, choose File > Open > Switch. An Operation Progress box is displayed
followed by a Remote Switch Dialog box as shown below.
3 Enter the following information, completing all four fields. Leaving a field blank does not result in
default behavior.
a The IP Address of the switch to which you want to connect
b The Virtual Router on which the SSH server traffic is routed
c The Admin Login ID
d The associated Admin Password
Then click OK. An Operation Progress box is displayed showing that the connection to and from
the switch is being checked.
NOTE
The EPM remembers the Remote Switch Dialog settings after they have been entered and the connection is
successful.
4 When there is a problem with the connection, the following box is displayed.
Check the suggested reasons and make the necessary adjustments. For additional information, refer
to "Configuring the EPM for use on a Switch" on page
Extreme Networks Policy Manager (EPM) 1.2 User Guide
Opening an Existing Policy
18.
31