Exporting Rules - Extreme Networks Policy Manager User Manual

Creating Policies and Rules
5 Click Yes or No. The following Merge Results box is displayed.
6 Click OK. The Rule Mark Notice is displayed stating that Updated and inserted rules will be
marked. (Refer to
7 Click OK. The new rule is displayed in all the rule viewing panels in rank order.
8 Save the policy.

Exporting Rules

Rules are exported from the currently open policy (the source) in two ways. They can be exported into
an existing policy or into a new policy that is created as part of the export process.
To export rules into an existing policy, use the following procedure.
1 "Mark" one or more or all rules that are to be exported. (Refer to
mark icon
NOTE
Rules must be marked to be exported.
2 From the Menu Bar, choose File > Export To... > Policy File. The Save box opens.
3 Select the target policy and click Save. The Confirm Export box opens as shown below.
4 Click No to cancel the process, or
Click Yes to overwrite the rules in the target policy. A Validation Notice box is displayed that
confirms the Policy was successfully exported.
To export rules into a new policy, use the following procedure.
1 "Mark" one or more or all rules that are to be exported. (Refer to
mark icon
2 From the Menu Bar, choose File > Export To... > Policy File. The Save box opens.
3 In the File Name: field, type a new policy name ending in ".pol" and click Save. A Validation
Notice box is displayed that confirms the Policy rules were successfully exported and the new policy
is opened with all of the rules displayed.
4 Open the new policy again to see the final new policy displaying only the marked rules.
42
"Marking Rules" on page
appears next to the rule name.
appears next to the rule name.
44.)
"Marking Rules" on page
"Marking Rules" on page
Extreme Networks Policy Manager (EPM) 1.2 User Guide
44.) A
44.) A