Extreme Networks Policy Manager User Manual page 24

Viewing Policies and Rules
The Actions tab
●
purposes. (The replay of actions is planned for a future release.)
The Log tab
●
messages that inhibit or cause failure of EPM functions.
For each of these three logs (Alerts, Actions and Log), there is a "Clear" button that removes the entries
currently appearing on the screen. These entries are then stored in the program's log files
(\Program Files\epm_supervisor\log). To set the maximum number of status capture lines for a log,
choose Tools > Properties > Message Capture > Set Capture Size from the menu.
The Policy Information tab
●
Information and Notes about that currently open policy. Information shows basic data including
when and by whom the policy was created and last modified as well as the number and type of
rules. Notes might include the purpose of the policy or other user defined identifiers. This is a read/
write text box.
To add to the Notes field:
a In the field, begin typing the desired text. The Apply Notes button is enabled.
b When the text is entered, click the Apply Notes button. The text is added.
To remove notes:
a Highlight the text to be removed then press the keyboard's Delete or Backspace key. The Apply
Notes button is enabled.
b Click the Apply Notes button. The text is removed.
24
displays the actions log messages. All user actions are recorded for audit
displays common log messages. The common log contains any trace or error
is displayed when a policy is opened and shows
Extreme Networks Policy Manager (EPM) 1.2 User Guide