Example 2-Example_Tcp_Udp_Balance.pol; Open And View The Policy - Extreme Networks Policy Manager User Manual

Running Extreme Networks Policy Manager Examples
5 Replace "100" with "200" then click Save and Close. The change is displayed in the "Match
Conditions" text panel and in the raw rule text of the other rule viewing panels.
6 From the menu, choose Policy > Refresh. The following Refresh Confirmation box is displayed.
7 Click Yes. An Operation Progress box is displayed followed by a Validation Notice stating that the
"Policy has been refreshed."
NOTE
The submenu command, Refresh, is enabled only when the policy being changed is currently activated on a switch.
8 Exit the EPM.
Example 2—Example_TCP_UDP_Balance.pol
This example uses two ACL rules and one CLEAR-Flow rule to track the ratio of TCP to UCP packets.

Open and View the Policy

1 Open the policy, "Example_TCP_UDP_Balance.pol" as a local file.
2 In the Tree Structure Panel under the Rules by reference tab, note the connections among the three
rules.
3 Expand the rules in the Rule Editing and Viewing Panel to view the raw rule text. (You may have to
extend the window downwards and the lower panels to view all three of the expanded rules at
once.)
4 Note from both views that the CLEAR-Flow rule is connected to both ACL rules and is ineffective
without both. The screen below displays these features.
58
Extreme Networks Policy Manager (EPM) 1.2 User Guide