Extreme Networks Policy Manager User Manual page 73

Action Modifier Selection Panel
sys_IcmpInBadCode - The number of incoming ICMP packets with a bad code field value.
sys_IcmpInTooShort - The number of incoming short ICMP packets.
sys_IcmpInBadChksum - The number of incoming ICMP packets with bad checksums.
sys_IcmpInRouterAdv - The number of incoming ICMP router advertisements. Router advertisements
are used by IP hosts to discover addresses of neighboring routers.
sys_IcmpOutProtoUnreachs - The number of outgoing ICMP packets addressed to a not-in-use/
unreachable/ invalid protocol. This message is in the general category of ICMP destination unreachable
error messages.
sys_IcmpOutRouterAdv - The number of outgoing ICMP router advertisements. Router advertisements
are used by IP hosts to discover addresses of neighboring routers.
sys_IgmpInQueries - The number of Host Membership Query messages that have been received on this
interface.
sys_IgmpInReports - The number of Host Membership Report messages that have been received on
this interface for this group address.
sys_IgmpInLeaves - The number of incoming IGMP leave requests. sys_IgmpInErrors - The number of
incoming IGMP errors.
sys_IgmpOutQueries - The number of Host Membership Query messages that have been sent on this
interface
sys_IgmpOutReports - The number of Host Membership Report messages that have been sent on this
interface for this group address.
sys_IgmpOutLeaves - The number of outgoing IGMP leave requests.
cvid:
Modifies the C-VID value. In the field, the value must be a positive integer number.
link-aggregation-hash:
Controls which link is used by matching VMAN traffic (egress only). In the field, the value must be a
positive integer number.
qosprofile:
Forwards the packet to the specified QoS profile (ingress only). The profile name must be one of the
default profiles. Values of "QP1" to "QP8" are allowed.
scos:
Modifies the S-COS value. In the field, the value must be a positive integer number.
stag-ethertype:
Modifies the VMAN Ethertype value, also called the S-Tag value. In the field, the value must be a
positive integer number.
73
Extreme Networks Policy Manager (EPM) 1.2 User Guide