Table of Contents
Advertisement
2 After reading, Close the box. The following IP Address Notice is displayed. This notice is displayed
every time the EPM is opened until an IP address has been set.
3 Click OK. The EPM then notifies the user if it has found a TFTP server. Without one, the EPM can
open and save local policies only.
a If it finds a TFTP server, the following notice is displayed.
Refer to
"Configuring the EPM for use on a Switch" on page 18
b If it does not find a TFTP server, the following notice is displayed.
If necessary, take the appropriate action to enable a TFTP server.
4 Click OK to close the box. The EPM Rule Editor window remains.
NOTE
A notice regarding TFTP server availability is also displayed in the Status Panel under the Alerts tab. (Refer to
"Status Panel" on page
23.)
Extreme Networks Policy Manager (EPM) 1.2 User Guide
Opening the EPM
to set the policy staging directory.
17
Advertisement
Table of Contents
