Activate The Policy On A Port - Extreme Networks Policy Manager User Manual

5 When the policy is saved, several changes occur:
A notice is displayed confirming the save;
●
The switch's IP address is displayed in the Tree Structure Panel to the right of the policy name,
●
replacing "localfile";
The Rule Activity tab is displayed in the Status Panel.
●
The Rule Editor window now appears as follows:

Activate the Policy on a Port

Observe in the screen above, under the Rule Activity tab of the Status Panel, that the policy is not active
on any VLANs or ports. This section describes the procedure to activate the policy.
1 From the menu, choose Policy > Activity.... The Policy Activity Manager dialog box opens.
2 Click the Activate Port command button. The Policy Activity - Activate Port(s) dialog box opens as
shown below.
Extreme Networks Policy Manager (EPM) 1.2 User Guide
Example 1—Example_TCP_Threshold.pol
55